产品用途：

，用来测试材料结构或复合材料，在瞬间下经*温及极低温的连续环境下所能忍受的程度，藉以在zui短时间内试验其因热胀冷缩所引起的化学变化或物理伤害。适用的对象包括金属、塑料、 橡胶，电子……等材料，可作为其产品改进的依据或参考。

产品规格表

产品特点：

●待测品不动（气体）冷热冲击试验机 
Air flow from preheat & pre-cool zones for shocking action while pecimen keep stationary in testing zone. 
●二箱或三箱式可程式控制模式 
Programmable control is for two zones & three zones test. 
●出风口号回风口感知器检知控制 
The control is checked by the average value of the outlet & inlet's sensors. 
●150（60℃）~（-10）-65℃.测试范围 
Testing temp.range is 150（60℃）~（-10）-65℃. 
●10 sec 内风向栅门机构切换时间 
The transfer time is within 10 seconds. 
●5 min 内冷热冲击温度恢复时间 
The recovery time is within 5 minutes. 
●50%省电效率与自动伺服机. 
Economize electricity of attrition is 50% efficiently that is serving control automatically. 
●IPC工业电脑控制器 
Industrial person computer is for the controller. 
●LCD中文/英文可切换液晶显示器 
Alphabetical LCD display by English-Chinese. 
●Help操作说明List 简易表单操作 
Exlain any screen operation is by a “Help" key & simple operated list. 
●远端监控管理系统 
Two way remote control & measurement management systerm. 
●RAMP 等（均）温度加速寿命试验机 
RAMP temp,chamber. 
●LN2V液态氮愉速降温控制装置 
LN2 serving control injection is for ramp temp.control.